no 2 way feedback? 580 4202p
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119231
Printed Date: June 10, 2024 at 8:53 AM
Topic: no 2 way feedback? 580 4202p
Posted By: thirtypackjack
Subject: no 2 way feedback? 580 4202p
Date Posted: January 10, 2010 at 12:10 PM
Just got a Python 580 (4202P). Both remotes can lock, unlock, start, stop, pit stop, etc. Only issue is the 2 way remote never gets feedback. Only getting out of range error. Any thoughts?
Thanks
-------------
Thanks,
ThirtyPackJack
Replies:
Posted By: t&t tech
Date Posted: January 10, 2010 at 1:47 PM
Try re-programming the remotes if it fails, diconnect power from the unit for a couple minutes and then try!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: Thack79
Date Posted: January 11, 2010 at 2:40 PM
you may have a deffective/wrong antenna. had the same issue with a 2way avital 5303
Posted By: t&t tech
Date Posted: January 11, 2010 at 5:24 PM
Or as thack said!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: nitroxdm
Date Posted: January 11, 2010 at 5:47 PM
Do you have just the one unit?
I have two cars that both have a DEI Matrix 3.2 installed. If there in the same area I have the same issue.
Once they are separated there isn't an issue.
Posted By: thirtypackjack
Date Posted: January 12, 2010 at 6:26 AM
Thanks for all the responses! I tried reprogramming the remotes all seems fine except the 2way never provides the confirmation chirp. I'm thinking its a hardware problem now....but I'll try rebooting
Only have one car.
-------------
Thanks,
ThirtyPackJack
Posted By: thirtypackjack
Date Posted: January 12, 2010 at 9:14 PM
Tried rebooting and reprogramming, same result - no confirmation chirp. My first one of these - anyone have any idea if these are problematic? If so what part is most likely the cause?
-------------
Thanks,
ThirtyPackJack
Posted By: Thack79
Date Posted: January 13, 2010 at 8:04 AM
switch the antenna with another one. i had the EXACT same problem before however the customer didnt really care, as long as it worked. Believe the antenna is a 548t i believe and i had an older one (same model number and everything) and it was doing the same thing you are describing.
|