I need an installer tech sheet for a 97 Toyota Supra TT 6-speed for an alarm. I am going to install a Clifford Avantguard 4 on my supra, and the alarm has a lot of wiring, Also, are there any recommendations on how to use my HKS turbo timer with the alarm? Is it necessary to use a relay for the nuetral safety switch, or should I just complete the curcuit?
heres your alarm diagram
12 volts - white & wht/red (+) polarity found running to steering column
ignition - BLACK / YELLOW (+) polarity found running to steering column
Starter - BLACK/ red (+) polarity found running to steering column
Power lock - GREEN/ YELLOW (-) polarity found in passenger kick panel
Power unlock - white (-) polarity found in passenger kick panel
Parking Lights - Green (+) polarity found in the drivers kick panel (white plug bottom of fuse box)
Door Trigger - RED / black (-) polarity found in the drivers kick panel (trunk trigger should tie in with this wire
If you have a factory alarm u should be all set becuz in most toyotas the factory alarm will arm/disarm with lock/unlock
hope this helped
-------------
Installer - Circuit City Roadshop(2 1/2 years n counting)
------------------
Alpine CDA7894(soon to be the cda9815)
Pioneer XM unit(soon to be direct link alpine)
Audiovox 995C alarm/remote start