ungo sr600 chirp setting

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119313
Printed Date: July 05, 2025 at 7:56 PM

Topic: ungo sr600 chirp setting

Posted By: southpaw26
Subject: ungo sr600 chirp setting
Date Posted: January 13, 2010 at 10:19 PM

Hello. I have an Ungo SR6000 alarm/remote start combo. Here is what I am wanting it to do. I have the alarm set to not chirp upon arming and disarming. But I want the 2 way remote to still chirp. The remote chirps when I have the alarm set to chirp but does not when I turn it off. Is it possible to make just the 2 way remote chirp and not the siren itself? If so what is the programming for that?

Replies:

Posted By: Twelvoltz
Date Posted: January 14, 2010 at 7:05 AM

I am not sure if you can do what you are requesting, however Ungo has their manuals posted on their website. You can get the install manual here and the owner's manual here. The Ungo product description link, which also has links to both manuals is here.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: southpaw26
Date Posted: January 14, 2010 at 11:04 AM

Yeah I have the manual but I can't figure out how to make it work like that.

Print Page | Close Window