program remote, remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119364
Printed Date: July 12, 2025 at 10:37 AM

Topic: program remote, remote starter

Posted By: redz250fz
Subject: program remote, remote starter
Date Posted: January 15, 2010 at 11:42 AM

i replaced the remote on my remoter starter for my 2004 elantra and im having trouble programming it... i found the hoodpin switch (i think) and i pressed it and nothing happend can anyone help?????..... i wass also reading a post on here from a guy a couple years ago and he was saying that you can ground it out with a grey wire or something like that..?

-------------
Mr. Yorke

Replies:

Posted By: Velocity Motors
Date Posted: January 15, 2010 at 10:02 PM

Need to know the make and model of the rmeote starter or alarm system that you have.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: redz250fz
Date Posted: January 15, 2010 at 11:42 PM

its a prostart 2000' two way remote start from Canadian Tire...i cant figure ou the flash hood pin switch part

-------------
Mr. Yorke

Posted By: tedmond
Date Posted: January 16, 2010 at 6:07 AM

there is a 5pin harness with black, purple. grey, orange and yellow. Take the grey wire and attach it to ground. Then use the button on the side of the unit

push it for 4 seconds, let go, press again and let go

turn the key in the ignition to run, then back off.

hold the lock button on your remote until the unit clicks 5 times.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: redz250fz
Date Posted: January 16, 2010 at 5:33 PM

ok thanks i'll give that a try

-------------
Mr. Yorke

Posted By: redz250fz
Date Posted: January 17, 2010 at 1:29 PM

ok just tried it i removed the grey wire from the harness and pluged the harness back in i attached the grey wire to ground pushed the button on the unit for 4 seconds let it go pushed it again let it go turned the car on then offff took the key out held the LOCK button and nothing happend the remote makes a very faint buzzing sound thats it :S

-------------
Mr. Yorke