adding on to viper 5901

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119367
Printed Date: July 09, 2025 at 7:23 PM

Topic: adding on to viper 5901

Posted By: andrewp
Subject: adding on to viper 5901
Date Posted: January 15, 2010 at 3:34 PM

Hey so I just got my Viper 5901 installed on my 09 Lancer....absolutely love it. I just recieved my DEI 620V VIPER ELECTRO-LUMINESCENT ARMED INDICATOR.......how can i install this simply on my vehicle to work and show its armed....i was wondering what i would connect this to since I only have visible access to the antenna....and that seems like the simplest to tap in to...what would i connect it to?

Replies:

Posted By: t&t tech
Date Posted: January 15, 2010 at 3:39 PM

You have to go to the control module, connect the red wire at a fused constant twelve source, connect the black to the GWA (orange wire) of alarm! And voila!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Print Page | Close Window