starter interupt ’05 nissan 350z

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119373
Printed Date: May 15, 2024 at 4:47 PM

Topic: starter interupt ’05 nissan 350z

Posted By: ieatbunnies
Subject: starter interupt ’05 nissan 350z
Date Posted: January 16, 2010 at 1:18 AM

I have read the newbies/advice thread. Checked either side of the year make and model of my vehicle. 350z 2005. So now I come to those who know.

I want to install a starter interrupt. If I put a switch on the starter wire wouldn't that do the trick? Simple that I only turn it off when I want to disable the car from starting but then just leave it on the 75% of the time.

Replies:

Posted By: zerepdivad
Date Posted: January 16, 2010 at 1:52 AM

Yeah a simple toggle switch would work for you. But if it's manual it can obviously still be push started.

-------------
A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Posted By: howie ll
Date Posted: January 16, 2010 at 8:52 AM

And the switch should be capable of handling 20amps unless you use a relay.

Posted By: misterjimbo
Date Posted: January 18, 2010 at 11:45 AM

I personally would use a relay but in that car I believe you have two starter wires so make sure you handle the situation accordingly

Print Page | Close Window