dlpkgm in 2006 cobalt
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119404
Printed Date: May 09, 2025 at 11:21 PM
Topic: dlpkgm in 2006 cobalt
Posted By: metz35
Subject: dlpkgm in 2006 cobalt
Date Posted: January 17, 2010 at 9:20 AM
my friend got this piece for his 2006 cobalt... i attempted an install yesterday , and the instructions didnt list cobalt.. but i found these instructions that list the cobalt
https://www.bypasskit.com/manuals/996_DLPKGM_H00_S00_D02_I_ENFR.pdf
my problem is that weather it was d2d or w2w, it didnt program, i held button plugged in plugs light came on, and as soon as the ignition was turned on the led just shut off.... its the first time i used one, so i dont know if it was user error, or the software version was wrong, or it just doesnt work with a cobalt... i used type 4 install... the software version is 1.0 any ideas????????
Replies:
Posted By: chev104275
Date Posted: January 17, 2010 at 4:01 PM
according to bypasskit.com the dlpkgm only does these features for the cobalt
2006 Chevrolet Cobalt, DLPKGM
*
W2W
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Driver Priority Unlock
DL-Trunk / Hatch Release
*
D2D
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Driver Priority Unlock
DL-Trunk / Hatch Release
what are you using to bypass the PK3 system ? what kind of system are you installing ?
ive used the dlpk modules on suzuki XL7 and KIA Sedona with no issues so far program first try make sure the module is up to date i check before i install any of them i think its at 14.04 right now you need the xkloader2 to program it
-------------
If i Can't Install it I Don't need it Joe
Posted By: metz35
Date Posted: January 17, 2010 at 7:41 PM
yeah i read that it only does locks and such, it was being used with an avital...im not really DEI friendly but i did remember the wire colors LOL. it just wouldnt program. im gonna check it at work tomorrow morning with my xk loader and see what the deal is..probablly gonna end up selling the guy a left over fortin piece, as im strickly a compustar and a blade AL guy
Posted By: chev104275
Date Posted: January 17, 2010 at 8:25 PM
that's what i usually use AVITAL 4103 and DLPK so far so good on Suzuki and KIA anyway
-------------
If i Can't Install it I Don't need it Joe
Posted By: tourrob
Date Posted: February 18, 2010 at 1:11 AM
I had the same EXACT problem in a 2006 cobalt, did both w2w and d2d, led turns off when programming as soon as I turn the ignition on.
I even emailed the FAQ section on the their website and no reply yet...
So, does the dlpkgm not bypass PK3?
This is the first chevy that I have worked on with electric powered steering and that does not have any heavy gauge wires going to the ignition key.
Posted By: monty_77
Date Posted: February 18, 2010 at 3:06 PM
the dlpkgm will only do the doors on a cobalt the better choice would of been the dlpk it will bypass the pk3 and the do the door locks
Posted By: ropuma
Date Posted: February 18, 2010 at 4:35 PM
Posted By: zerepdivad
Date Posted: February 19, 2010 at 1:02 AM
I used an xk06 on the 06 cobalts i've done with no issues whatsoever.
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
|