530t and viper 5901 mustang problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119439
Printed Date: May 20, 2024 at 9:59 PM
Topic: 530t and viper 5901 mustang problem
Posted By: sweetcoupe
Subject: 530t and viper 5901 mustang problem
Date Posted: January 18, 2010 at 2:34 PM
Hi,
Im trying to install the 530t remote window module into my 03 mustang gt with the viper 5901 al/rs. I found got out the meter and tested out all the connections at the back of the switch and hooked them up per the instructions. After I was done, when I hit aux 1 the windows would only go down about 1 inch each time and when i hit aux 2 the same thing would happen except going up.
So I checked on here and found the wiring diagram and it looks like I did everyting right for the passanger side but the drivers side I saw something about doing it near the motor because or the 1 touch factory option. I did that and it still doent work right.
So I ripped everything out and just hooked up this
Driver up WHITE/ black switch side
Driver up WHITE/ black plug & motor side
and the 12v, ground, and aux 1 and 2
Im still having the issue. Even if I hit the button on the door it wont start moving until I let go of it, then it goes an inch.
Any help will be greatly appreciated.
Replies:
Posted By: sweetcoupe
Date Posted: January 20, 2010 at 8:26 AM
ttt
|