prostart

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119441
Printed Date: July 05, 2025 at 2:45 AM

Topic: prostart

Posted By: abomb9182
Subject: prostart
Date Posted: January 18, 2010 at 4:31 PM

Hi, I am new to the forums and farley new to installing command starts. One of the first ones I did just came back and his antenna light blinks even wheen driving. It is a Prostart 3in1 Module in a 2006 Buick Allure using a idatalink ADS-TBSL-PL Bypass in the rs232 port. If anyone knows why this would be blink I would love to know, the starter works great otherwise.

Replies:

Posted By: tedmond
Date Posted: January 18, 2010 at 7:32 PM

does it have keyless entry?

the LED on the antenna is programmed to flash when the starter kill is installed. This only flashes when its armed. Go into programming and set it to flash when no key in ignition.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: Velocity Motors
Date Posted: January 18, 2010 at 8:43 PM

Either program it out or if you did not install keyless option to the ProStart, then all you have to do is get the customer to press the UNLOCK on the remote and it will stop the LED from blinking.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window