commando electric locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119446
Printed Date: May 21, 2024 at 3:36 PM
Topic: commando electric locks
Posted By: cactusjack
Subject: commando electric locks
Date Posted: January 18, 2010 at 7:50 PM
I am in the process of installing the commando power lock and keyless entry kit. Here is the link: https://www.commandocaralarms.com/itemdetails.asp?Productid=1459 i have no clue how the two modules connect to each other. I have all the actuators mounted and the wires to the doors ran. If anybody has a clue on how the small box connects to the big box, it would be amazingly appreciated! There were no instructions in the box that were worth reading.
Replies:
Posted By: cactusjack
Date Posted: January 18, 2010 at 7:51 PM
not that it matters, but im installing this on an 08 Jeep Compass with manual locks....hence the reason I am installing power locks and keyless entry...
Posted By: cactusjack
Date Posted: January 19, 2010 at 9:58 AM
really? nobody knows?
Posted By: howie ll
Date Posted: January 19, 2010 at 2:33 PM
Your question is extremely vague. By small box I assume you mean the lock control module and by large box is assume you mean the keyless entry control box.
Post the actuator wire colours and the wires coming out of the two boxes, maybe then we can help you.
|