oem dodge alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119464
Printed Date: June 09, 2024 at 12:02 PM
Topic: oem dodge alarm
Posted By: blasito1973
Subject: oem dodge alarm
Date Posted: January 19, 2010 at 12:23 PM
hi i am working on a 2001 dodge , the trouble is : i need to find the wire that makes the doors lock at 15 MPH , the truck keeps snding the signal to lock so if you go over 15 it keeps sending the signal to lock and it fried the oem lock modules so i need to find out wich cable is it any help would be great
Replies:
Posted By: Twelvoltz
Date Posted: January 19, 2010 at 1:14 PM
This is normally a function of the BCM...NOT something controlled by a wire. Is there something specific that makes you think the locking at 15mph feature burned out the locks? The truck is 9 years old. It is probably just time to get new actuators. I have had to replace quite a few of them in trucks this age.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: blasito1973
Date Posted: January 19, 2010 at 1:38 PM
im working on this rigth now , and heres what i found so far :
as soon as you turn the key the relays on the module make a very faint click click , and it keeps that way , then nyou start the truck it stops , but when you reach 15 mph it starts to lock (try to lock ) so the relays go click , click , etc.
and the way i know that it has to be some signal from the engine is that the signal to lock at 15 mph has to be a vaccum because when you are at + 15 mph and you let go the accelerator it stops clicking but when you accelerate it clicks again thats the reason i know it has to be some ground that activates the actuators
i am going to try to test this
|