idatalink vs omegalink

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119520
Printed Date: May 03, 2025 at 10:03 PM

Topic: idatalink vs omegalink

Posted By: luvs2div
Subject: idatalink vs omegalink
Date Posted: January 21, 2010 at 12:36 PM

Are these two actually compatible? Can you D2D an Idatalink to an Excaliber/Omega remote start/alarm? Use an Omegalink transponder ring on an Idatalink module? I get modules from 2 different sources. One always has the rings and the other always has the modules. Do they interchange?

Replies:

Posted By: thunderplains
Date Posted: January 21, 2010 at 12:37 PM

You can also check over at www.12voltdata.com, which is Idatalinks forum, you might find more information there.

Posted By: Mike M2
Date Posted: January 21, 2010 at 2:18 PM

Omegalink and Flashlogic products are just Idatalink units repackaged. Totally interchangable....

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: kickyride
Date Posted: January 21, 2010 at 4:18 PM

They are interchangeable. Just pay attention to the data port protocol if you want to use it D2D. Also, each differing brand has different connectors for the data port so watch out for that too. Some CAN be used on others that sort-of fit. If you go wire to wire, there'll def be no problem.

Mike

-------------
Mike
Sales/Tech Support - KICKYRIDEoCOM mobile electronics
MECP 1st class-Security Specialist

Posted By: luvs2div
Date Posted: February 01, 2010 at 11:31 AM

Thank you all....Love this site!!!!

Print Page | Close Window