viper 5701 5 flsh/ ignition trigger?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119619
Printed Date: April 26, 2024 at 2:21 AM

Topic: viper 5701 5 flsh/ ignition trigger?

Posted By: disposablehero
Subject: viper 5701 5 flsh/ ignition trigger?
Date Posted: January 25, 2010 at 8:33 AM

Couldnt get any help on caraudio.com. Anyone here wanna give a little advice?

Just installed a viper 5701 and everything works fine except when I arm the alarm or pertty much do anything with the alarm I get the long chirp and 5 flashes claiming ignition trigger fault. What in the hell is this and how do I get rid of it? I dont have access to an updated bit writer and dont ant to take it to a shop to have that done.

This is for a 2001 silverado 2500HD whick is kindof a mutt truck as far as wiring. I am lost. It gets pretty annoying to hear all the extra chirps and screaches when they arent needed.

Replies:

Posted By: disposablehero
Date Posted: January 25, 2010 at 8:43 AM

Actually after rereading the manual it gives a long chirp and flashes 5 times. This seems like it isnt right. Its loud and annoying.

Posted By: disposablehero
Date Posted: January 25, 2010 at 2:40 PM

Went to Best buy, lol, they couldnt figure it out either. They said they would replace the brain if I brought the receipt. They didnt install it. We did yest. They checked everything on the install and it is perfect. It does this with every comand