factory disarm, 89 acura legend
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119676
Printed Date: May 14, 2025 at 11:21 PM
Topic: factory disarm, 89 acura legend
Posted By: clapclapngo
Subject: factory disarm, 89 acura legend
Date Posted: January 26, 2010 at 10:51 PM
How do i find and test for the factory disarm wire in a 1989 Acura Legend? The wiring destructions say its GREEN/ red like the unlock wire.But i take it it's not the same wire, because my alarm is triggered when i unlock car with remote. so the negative pulse on that wire isn't sufficient to disarm alarm. I have a -5oomA factory disarm output from the Scytek Precision 2200 remote starter i've installed and need to know where to connect it. I'm thinking i should take off door panel or if i knew where security module is and what it looks like i might find the wire there. Also, i called tech help and they told me its GREEN/ red wire and that i don't need to connect the Rearm wire. Wouldn't the rearm wire need to be connected? Can someone please help.
Replies:
Posted By: monty_77
Date Posted: January 27, 2010 at 12:58 AM
mine say
Disarm GREEN/ YELLOW At Keyless Entry Module Negative
The keyless entry module and the anti-theft module are both mounted on the right side of the steering column. Lock GREEN / WHITE,
Unlock GREEN/ Red
|