Am I in valet mode?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11969
Printed Date: August 30, 2025 at 2:07 PM
Topic: Am I in valet mode?
Posted By: dyer
Subject: Am I in valet mode?
Date Posted: April 08, 2003 at 6:15 PM
Here is the scenario.
i'm putting an impact-3000 alarm on a schooll bus for some of my friends. A couple days ago, everything worked great. Then one of my friends went to show it off. He set the alarm off getting in and used the override button to stop it. Now the alarm doesn't work correctly. It seems to arm or disarm fine. However, when doors are opened...it doesn't go off. Also now you could ram it with a bulldozer and the shock sensor wouldn't set it off. If you hit it it gives warning chirps, but the alarm itself won't trigger. Before tapping it would set it off. Am i in valet mode or what? I need ANY help please.
-------------
Dyer
Replies:
Posted By: x6369x
Date Posted: April 08, 2003 at 9:22 PM
Is the LED on constantly on? If so, that may indicate that the alarm is in valet mode, but consult your user/install manual. I know the LED is constant when the DEI (Viper, Clifford, Python, ...) and Audiovox systems are in valet.
-------------
Friends Don't Let Friends Bump Stock.
Posted By: dyer
Date Posted: April 08, 2003 at 9:25 PM
if i only had the manual!!!
-------------
Dyer
|