Print Page | Close Window

Clifford Wiper and Sunroof Wiring on Acura Integra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1197
Printed Date: May 12, 2025 at 4:26 AM


Topic: Clifford Wiper and Sunroof Wiring on Acura Integra

Posted By: sleepy186
Subject: Clifford Wiper and Sunroof Wiring on Acura Integra
Date Posted: June 09, 2002 at 1:47 AM

I have a Clifford AvantGaurd 4 alarm, and I need to do an install on an 1998 Acura Integra LS.  The wires I'm having trouble wiring the sunroof to open and close with the auxilary output that grounds for a preset amount of time.  Also for the wiper input and output, which ones should I use coming from the wiper switch? 

Thanks




Replies:

Posted By: Velocity Motors
Date Posted: June 09, 2002 at 10:12 AM
  • IF you are wanting to open and close the sunroof via remote control you will need to add window modules and each module will need it's own ( - ) trigger from the alarm.
  • As far as the wipers go you need to use both wires ( BLUE & BLUE / YELLOW ) and diode isolate each wire form the alarm using a 4001 diode. You can get these at any electronics stor or Radio Shack.
  • The sunroof wires are :
    • CLOSE : GREEN/ YELLOW
    • OPEN : GREEN/ RED


-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window