Print Page | Close Window

viper 5901 12volts

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119745
Printed Date: May 15, 2024 at 3:05 PM


Topic: viper 5901 12volts

Posted By: eghatchie
Subject: viper 5901 12volts
Date Posted: January 29, 2010 at 6:59 PM

Just install a 5901 viper alarm to my 1997 honda civic ex..................got the remote start to work and everything But im still having some problems.......can 12volt help out ..................thanks

Problems
1-Headlight and taillights not blinking when arm and disarmed (10a fuse in the cpu is on)
2-Cliclimate control not working unless key is in the ignition
3-Having alot of left over wires

heres the diagram of the viper 5901 alarm/remote starter

https://img6.imageshack.us/img6/276/img0199m.jpg

i circle all the wiring that i couldnt fix and need help with

H1/4- WHITE/ BROWN PARKING LIGHT ISOLATION WIRE pin 87a on onboard rly (what is this wire for and do i need it)

H1/9- BLACK/ WHITE (-) 200mA DOME LIGHT SUPERVISION OUTPUT (cant find the wiring does anyone know were it located)

H1/10- WHITE/ BLUE (-) REMOTE START/TURBO TIMER ACTIVATION INPUT  (what should i do with is wire)

H1/11- WHITE PARKING LIGHT OUTPUT ( what is this wire used for and were can i find it.........in a honda civic 97 ex)
       Is this the reason why my tailligh and headlight arent blink when i arm or disarm the car

H3/7-  PINK/WHITE (+) IGNITION2/ FLEX RELAY OUTPUT (What i this wire used for)

h3/8 PINK/BLACK (+) FLEX RELAY INPUT 87A KEY SIDE ( What is this wire used for)

H2/11 to H2/14 on the chart what are these wire used for and do i need them

also car that the alarm is going in to is a 97 honda civic ex 5 speed

-------------
EgHatchie




Replies:

Posted By: t&t tech
Date Posted: January 29, 2010 at 7:08 PM

WHITE/ brown- unused

BLACK/ white- unused

WHITE/ blue- unused

white- this is your parking light wire, and also the reason yoru lights aren't blinking with the alarm!

Pink/white- ignition 2!

Pink/black- unused!

The h2 harness wires you refer to are also unused!



-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5




Posted By: t&t tech
Date Posted: January 29, 2010 at 7:09 PM
Constant 12V+ White  Ignition Switch Harness 
Starter BLACK/ White  Ignition Switch Harness 
Ignition BLACK / YELLOW  Ignition Switch Harness 
Ignition 2 Yellow  Ignition Switch Harness 
Accessory WHITE/ Black  Ignition Switch Harness 
Tach Blue  Coil 
Neutral Safety Wire BLACK/ Blue (-)   
Brake Switch GREEN / WHITE  Brake Switch 
Trunk Pin Blue/Black (-)  Driver's Kick or behind Radio Light Green (-) 
Parking Lights RED / Black (+)  Driver's Kick Panel or above Fuse Panel 
Head Lamp RED / White left.  RED / Blue right at Steering Column 
Door Trigger Light GREEN/ Red (-)  Anti-Theft Module behind Radio Green Connector 
Door Lock GREEN / WHITE (-)  Above Fuse Panel or at Anti-Theft Module 
Door Unlock GREEN/ Orange (-)  Behind Radio Green Connector 
Horn Wire Gray (-)  Steering Column or Green Connector behind Radio 
Windows Up LF=RED / Yellow, RF=Blue / YELLOW, LR=GREEN/ YELLOW, RR=Yellow 
Windows Down LF=RED / Blue, RF=Blue/Orange, LR=Green, RR=YELLOW /GREEN 


-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5




Posted By: eghatchie
Date Posted: January 29, 2010 at 7:13 PM

so all i need to do is run h3 pink/white wire to the h3 RED / white and that it

and the viper 5901 comes with a 12mins remote start time how can i ajust that



-------------
EgHatchie




Posted By: t&t tech
Date Posted: January 29, 2010 at 7:20 PM

No the pink/white would connect to the ignition 2 wire in the car which is yellow like i posted above!

To adjust the runtime

Turn ignition on the off

press and hold the valet switch until you hear three chirps

then press the valet switch 5 times hold on the fifth press

there are three settings

1chirp setting- 12mins (default)

2 chirp- 24mins

3 chirp- 60 mins (Which is really overkill in my opinion!)



-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5





Print Page | Close Window