viper 130 neg out?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119756
Printed Date: May 19, 2024 at 8:23 AM

Topic: viper 130 neg out?

Posted By: bruc007
Subject: viper 130 neg out?
Date Posted: January 30, 2010 at 1:35 PM

I have not done any Vipers lately and need to know how to run a negative out while running to wire in a keyoverride all bypass.do I have to relay it or is there a wire from the harness .I have read the install manual but dont see a neg out wire.Any help?

Thanks Bruce

Replies:

Posted By: t&t tech
Date Posted: January 30, 2010 at 5:21 PM

Blue/white wire- also called status out or deffoger

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Posted By: tedmond
Date Posted: January 30, 2010 at 5:27 PM

blue/white (-) aka status output from viper to BLUE(-) on key-override-all

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: bruc007
Date Posted: January 30, 2010 at 5:32 PM

Thanks guys,I was leaning that way and would have tested.I knew someone here would help as usual

Print Page | Close Window