2009 ford edge liftgate

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119893
Printed Date: May 09, 2025 at 6:37 PM

Topic: 2009 ford edge liftgate

Posted By: jkyliej
Subject: 2009 ford edge liftgate
Date Posted: February 04, 2010 at 10:32 AM

All,

I need to install a remote start on a 2009 Ford Edge and the customer wants to retain the power liftgate feature. In my research I find nothing that specifically relates to wiring this option. Has anyone got any info on what it would take to do this? I'm going to use a Compistar 2W900FMR and a iDatalink MULTI AL CA.

Thanks!

-------------
JKJ

Replies:

Posted By: kreg357
Date Posted: February 04, 2010 at 10:54 AM

If they haven't changed it, on the 2007 Edge the Power Liftgate open/close wire is Gray / YELLOW (-) at the switch in the dash or in driver kick panel.

If you have it, use the IDatalink ADS TB. It cheaper and the ADS AL CA doesn't do any more.

-------------
Soldering is fun!

Posted By: jkyliej
Date Posted: February 05, 2010 at 12:19 AM

Thanks for the info. I may pass on this one. I hate spinning my wheels and the customer seems pushy. I'll check to see if I have that TB, I know I have at least one other type in here right now but mostly stock the AL CA. Thanks again.

-------------
JKJ

Print Page | Close Window