95 integra clutch bypass
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119920
Printed Date: May 10, 2025 at 5:53 PM
Topic: 95 integra clutch bypass
Posted By: mlathrop
Subject: 95 integra clutch bypass
Date Posted: February 05, 2010 at 4:56 PM
Im a newbie to the standard world of remote starters , done my fair share of auto's over the years but not sure of what to do to bypass the clutch on my 95 integra. Anyhelp would be greatly welcomed.....IM using an AST1270M Thanks MIke
Replies:
Posted By: monty_77
Date Posted: February 06, 2010 at 1:52 PM
blue/black at the clutch switch
you must send a negative to it at the time of starting
Posted By: mlathrop
Date Posted: February 06, 2010 at 3:17 PM
So would the Orange GWR be enough ? or do i need to use a relay 86 to 12volts 87 to to ground 85 to GWR and 30 to blue black on clutch switch ? Thanks ?
Posted By: monty_77
Date Posted: February 06, 2010 at 4:13 PM
I would add a relay so you know it will be good
And it should keep the brain safe sense most are 500 ma or less
Posted By: mlathrop
Date Posted: February 06, 2010 at 4:23 PM
thanks monty_77....the way i listed wiring the relay sounds right to you ?
Posted By: monty_77
Date Posted: February 06, 2010 at 9:00 PM
looks go to me
Posted By: zerepdivad
Date Posted: February 06, 2010 at 9:11 PM
Multimeter would have been much quicker to answer than anyone on this forum haha.
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: monty_77
Date Posted: February 06, 2010 at 9:22 PM
some of us have to work and are not at the computer 100% of the time
have to pay the bills and this is free!
Posted By: zerepdivad
Date Posted: February 06, 2010 at 9:33 PM
Exactly. While he was waiting he could have figured it out by himself.
now he's likely to never post again. I imagine the average post count for people on this forum is like less than 20 if you factor in all the people who come on here just to get spoonfed information then never post again.
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: monty_77
Date Posted: February 06, 2010 at 10:24 PM
if figure i get some help now and then on this forum.
the least i can do is give some when i can.
Posted By: mlathrop
Date Posted: February 07, 2010 at 7:08 AM
Thanks again monty_77 , I dont know what what the other gentlemans issue is , but this is a forum to help your fellow man reaching out for a helping hand along with sharing knowledge to help improve each other, he should remember that. I wish you aswell as him a good relaxing sunday.
|