autopage c3 rs 625 doorlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119971
Printed Date: May 09, 2025 at 8:43 PM

Topic: autopage c3 rs 625 doorlock

Posted By: stanger90
Subject: autopage c3 rs 625 doorlock
Date Posted: February 08, 2010 at 1:54 AM

I'm a little lost, can some help me with the door lock output on this unit? How do you set the output of the doorlocks? I'm not seeing anything in the setup about changing it from + to - or type a or b... does it somehow to do it. I see that the same green and blue wires are used just in reverse order depending on a type a or b system. Very confused!

Thanks,

John

Replies:

Posted By: sneakycyber
Date Posted: February 08, 2010 at 2:41 AM

I'm not an auto page installer so I can't see the install manual. However it appears that the unit supports both positive and negative door locks. To do this it automatically uses both neg and pos pulses at the same time on opposite wires. So during unlock if the green wire is a negative then the blue will be a positive pulse. Wire up the locks accordingly. What kind of car are you working on?

-------------

Posted By: stanger90
Date Posted: February 08, 2010 at 7:49 AM

That's exactly what I was thinking, just wish the manual was a bit clearer. This will be going into a 2000 mustang.

Thanks for the reply.

Print Page | Close Window