5701 two way pager
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120022
Printed Date: August 26, 2025 at 9:51 PM
Topic: 5701 two way pager
Posted By: rcracer_6955
Subject: 5701 two way pager
Date Posted: February 10, 2010 at 11:18 AM
I have full functionality as far as the lock/unlock, r/s, and trunk. I get an error on the two way remote every time it executes a command though. The yellow/orange LED at the top glows followed by the red function light with an annoying buzz. I cannot get the two way to work. I'm trying to avoid the shop because they did not really feel confident in installing viper alarms. (they told me this afterward).
This has never properly worked. Do I need to reprogram the remote?
Replies:
Posted By: kgerry
Date Posted: February 10, 2010 at 4:24 PM
pull the 15 amp fuse on the secondary harness for about 20 seconds and put it back in... this should "reboot" the brain and usually cures this problem.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: rcracer_6955
Date Posted: February 10, 2010 at 7:03 PM
I tried that. I also pulled the neg. battery terminal for 10 min. Nothing. I relearned the remote. Nothing.
Is this a transmitting problem or a broken remote?
Posted By: kgerry
Date Posted: February 11, 2010 at 9:14 AM
that has always worked for me but i guess it could certainly the remote... you may need to program a new remote just to test further.... if it works fine you have a bum remote.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|