dpk mods
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120101
Printed Date: May 03, 2024 at 8:14 PM
Topic: dpk mods
Posted By: bambam3030
Subject: dpk mods
Date Posted: February 13, 2010 at 3:50 PM
I have been installing for many years and in the last two years I have stoped doing it for a job. On the side I do a car once in a while, so today I put an avital 5303 in a 05 tahoe easy truck so I thought. I got done in about half an hour but I cant get the DLPK GM to program. I went wire to wire not data to data. hooked purple to the purple dionostic wire, and it will not go into program mode. I follow the instuctions by my understanding is to push and hold program button plug first harness in then the led should light up and it does nothing. I just did a 07 silverado last week and had the same problem with the dlpk but for some dumb reason it worked without programing. any Ideas????
-------------
BAM
Replies:
Posted By: dasbogie
Date Posted: February 13, 2010 at 6:55 PM
did you cut the data harness and wire 12v to blue and black to ground
Posted By: bambam3030
Date Posted: February 13, 2010 at 7:21 PM
yes i did that also
-------------
BAM
Posted By: Chris Luongo
Date Posted: February 13, 2010 at 8:20 PM
On the 4-pin harness that has the power and ground, what colors did you use?
You'd think it would be red and black, wouldn't you? Well, someone at DEI needs a slap upside the head.
Black is ground, and constant is......blue! The red and white don't go to anything.
Posted By: bambam3030
Date Posted: February 13, 2010 at 9:26 PM
Really I will have to try that thank you very much!!!
-------------
BAM
|