viper 5501 unpair dump remotes

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120123
Printed Date: May 15, 2025 at 8:18 AM

Topic: viper 5501 unpair dump remotes

Posted By: foilingfool2
Subject: viper 5501 unpair dump remotes
Date Posted: February 14, 2010 at 3:22 PM

I have 2 cars with 5501 remote start units. I am trying to pair up the remotes to work with both cars, but would like to remove all remotes from the units first. Is there a way to dump the remotes from the brain without losing other settings like remote run times, etc?

Thanks,

Tom

Replies:

Posted By: tedmond
Date Posted: February 14, 2010 at 5:23 PM

yes there is. do you have the install manual?

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: foilingfool2
Date Posted: February 14, 2010 at 5:45 PM

Thanks for the reply.

Before posting, I did some searching but was unable to find any information. Nor was I able to locate a copy of the Installation Manual online. Then after posting my question, I dug a little more, and found that this site has a documentation area. I did not find the 5501 remote start installation manual, however, I did find the 5901 security/remote start installation manual which was good enough !!

I found the section menu item for clearing remotes and gave it a shot. Everything worked as expected, and I now have all remotes working with both cars in the Car 1/Car 2 modes.

Thanks,

Tom

Posted By: tedmond
Date Posted: February 14, 2010 at 6:15 PM

good to know you got it working.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert