can high/can low?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120173
Printed Date: April 29, 2024 at 6:47 AM

Topic: can high/can low?

Posted By: el ranchero
Subject: can high/can low?
Date Posted: February 16, 2010 at 5:27 PM

hey guys, quick questions what is can high/can low used for, and when do u know it needs to be applied is this for the data modules. thank in advance.

-------------
rocker

Replies:

Posted By: i am an idiot
Date Posted: February 16, 2010 at 6:10 PM

Those wires are for use with data modules only.

Posted By: howie ll
Date Posted: February 17, 2010 at 12:41 AM

Run a search on this site there have been a few good posts answering your questions.

Posted By: joebubba
Date Posted: February 17, 2010 at 7:34 AM

Most newer models use a bus system (called canbus)for data communication that controls various systems on the car. Most bus systems have a high speed and a low/lower speed bus system. The data modules can interface with the bus system to make alarm/remote start inputs via the data bus where applicable, rather than a straight wire to wire connection.

Print Page | Close Window