Print Page | Close Window

2007 jeep liberty factory key not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120228
Printed Date: May 02, 2024 at 4:48 PM


Topic: 2007 jeep liberty factory key not working

Posted By: dayne97
Subject: 2007 jeep liberty factory key not working
Date Posted: February 19, 2010 at 12:11 AM

I installed a Crimestopper 1704 DPFMII starter with an idatalink ofa-30 bypass with I believe ch-6 software (the jan. 2010 update). Everything with the starter functions fine....Except....

He says that one of his OEM keys w/integrated fob no longer starts the vehicle (turns on acc. etc.) If he remote starts the vehicle and uses that key to turn the vehicle on it works (my thinking is the vehicle has already been tricked into thinking the key is already there).

Has anyone come across this before? is it something I could have done? I have never heard of this before.

How about a remedy?

Regards,

Gavin




Replies:

Posted By: shafferny
Date Posted: February 19, 2010 at 6:51 PM

I hightly doubt it's anything you did. In fact, didn't you have to have two keys to program the transponder bypass? That must mean it worked when you installed the rs.





Print Page | Close Window