autopage rf-305 door lock programing?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12023
Printed Date: May 20, 2024 at 1:22 PM

Topic: autopage rf-305 door lock programing?

Posted By: quiksliver808
Subject: autopage rf-305 door lock programing?
Date Posted: April 10, 2003 at 1:43 AM

How do i get the door locks to auto lock when i start the car? Do i need to program it to do that? If so does anyone
know how to reprogram it? Right now i can lock and unlock it with the remote. But when i start the car the locks remain unlocked.

thanks for any help

Replies:

Posted By: GMC4x4Guy
Date Posted: April 10, 2003 at 3:49 AM

I have the instructions for the RF-310, but I think they are the same.

Turn the ignition on\off three times and stay in the off position

Push the valet switch four time and hold it in on the fourth push, when a long chirp is heard release the switch.

For ignition controlled door locks, push the trunk button once.

Turn the ignition back on or wait 15 seconds to exit the programming mode. Three chirps confirm exit.

Good Luck.

-------------
"Drive it like you stole it"

Print Page | Close Window