88 jeep cherokee lock/unlock wires

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120250
Printed Date: May 15, 2024 at 8:32 AM

Topic: 88 jeep cherokee lock/unlock wires

Posted By: dwnell35
Subject: 88 jeep cherokee lock/unlock wires
Date Posted: February 19, 2010 at 9:28 PM

I am hookin up a keyless entry on a 88 jeep cherokee, and its ask for a 5 wire reverse polarity, ok thats easy. but when i hook it up nothing works. i triple checked my connections. i tried positve trigger, neg trigger, nothing works. the dark green is unlock, and the white is lock. i ran the wires through the door to get a precise measure for the reverse polarity cut. so i know iam on the switch side and the motor side correctly. have any one ever did this year or have a good advice for this car, iam not new at this its just i cant figure out whats up with this car lock system. and it dont have factory keyless entry.

-------------
dnell

Replies:

Posted By: x1le
Date Posted: February 19, 2010 at 9:37 PM

give us a run down on how you got the relay wired.

And the car has power locks, correct?

Posted By: dwnell35
Date Posted: February 20, 2010 at 10:26 AM

look at this link and on page 15 u will see how its relayed for reverse polarity, also other choices of relays (positive triggered and neg triggered startin on page 14) https://www.autoditto.com/images/cx-2300-user-manual.pdf i hope u can help me. and remember i ran the wires up to the door switch so can know i cut the wire after the switch and before the motor for the reverse polarity. and this r/s unit has built in relays for lockin system as u you will see in the diagram

-------------
dnell