Print Page | Close Window

600 esp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120258
Printed Date: April 28, 2024 at 2:43 AM


Topic: 600 esp

Posted By: 01burb
Subject: 600 esp
Date Posted: February 20, 2010 at 3:32 PM

I have the 600 ESP installed in my 1987 Firebird.  It has been working great until today, last used 3 days ago..  The alarm is armed but the remotes (2) won't disarm or do anything, no chirps, but when the door is opened the alarm sounds.  I replaced the battery still nothing.  Any Ideas?  Thanks George



Replies:

Posted By: bambam3030
Date Posted: February 20, 2010 at 5:11 PM

You can try to reprobram the alarm remotes by First turning the alarm off manualy with the valet switch. Find the button then turn your key to the on position and press in the valet button let it go and press it in and hold it. that should turn your alarm off. Then turn your key on and press your valet button in let it go and press it back in and hold it. while holding the button in press the lock button on the key pad that you are programing and you should hear the alarm chirp at you. If this doesnt work it could be bad remotes but I dobt two went bad at the same time. It could also be the alarm brain it self, You would have to check all the power wires and make sure they are still connected and geting the proper voltage. hope this helps.



-------------
BAM



Posted By: 01burb
Date Posted: February 20, 2010 at 7:53 PM
Thanks I'll try it in a couple of days when I get back to the car.


Print Page | Close Window