viper 5701 program feature issue
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120288
Printed Date: September 10, 2025 at 6:28 AM
Topic: viper 5701 program feature issue
Posted By: rip14
Subject: viper 5701 program feature issue
Date Posted: February 21, 2010 at 4:35 PM
Hi,
I am trying to change some features on my 5701. For some reason, it will not enter the program menu.
I open the door, turn the ignition on then off, and then press and hold the valet button.
The only thing that happens is it goes into valet mode (Blue LED stays on, fob beeps once.) If I repeat my steps, it turns valet mode off.
I know everything including the door wire is hooked up properly. (Alarm goes off when door is opened)
Its acting like it is not seeing the door open while I am trying to program.
Any suggestions would be appreciated.
Replies:
Posted By: t&t tech
Date Posted: February 21, 2010 at 4:41 PM
Try grounding the green wire during programming! What type of vehicle?
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: rip14
Date Posted: February 21, 2010 at 5:51 PM
It's a 2000 cavalier.
I tried grounding the door trigger, same result.
|