viper 5901, closed loop sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120300
Printed Date: May 18, 2024 at 3:06 AM

Topic: viper 5901, closed loop sensor

Posted By: raptor2k10
Subject: viper 5901, closed loop sensor
Date Posted: February 21, 2010 at 8:46 PM

I am looking to install a DEI 502T closed loop sensor on my viper 5901. I am looking for what wires to connect to. I currently have a shock sensor, tilt, prox, backup siren. I am installing it on a pickup. Thanks in advance.

Replies:

Posted By: monty862
Date Posted: February 21, 2010 at 10:04 PM

I'd use the the blue wire on harness one. (H1/7) It is called the Trunk Pin / Instant Trigger Input. It probably is already in use by other sensors, so you will have to diode isolate from them.

-------------

Print Page | Close Window