2010 dodge ram wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120341
Printed Date: April 18, 2024 at 5:15 PM
Topic: 2010 dodge ram wiring
Posted By: johnwayne8211
Subject: 2010 dodge ram wiring
Date Posted: February 24, 2010 at 1:30 PM
Hey everyone....I am about to wire up a 2010 dodge ram 1500 and am wondering if anyone has the wiring for a starter/alarm.
Thanks
Replies:
Posted By: Nate_Dogg
Date Posted: February 26, 2010 at 9:14 PM
Hey, I just got an idatalink box,it interfaces with the can network for lock/unlock,remote start etc..I haven't set it up yet,but I'll let you know how it goes.
P.s. if you don't have the bypass modual for door locks,go into the pass.side door for lock/unlock,green connector.Resisted/mux.
I don't have wiring info just yet.
-------------
Chrysler Tech.
Clarion dealer
Black Widow,Ungo alarms.
General electrical
Posted By: johnwayne8211
Date Posted: February 27, 2010 at 8:49 AM
I picked up the same bypass and am going to do the install tonight, if you haven't got the wiring by then I will post it after I test everything out.
-------------
Enforcement Lighting Specialist
Communications Installer
Posted By: Velocity Motors
Date Posted: February 28, 2010 at 6:02 PM
Fortin & iDatalink both have the wiring information for this vehicle. Very minimal wires are required for remote start and keyless.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|