Proximity sensor....
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12036
Printed Date: May 19, 2024 at 2:03 PM
Topic: Proximity sensor....
Posted By: eld101
Subject: Proximity sensor....
Date Posted: April 10, 2003 at 2:29 PM
Just got one for really cheap and want to add it on to my alarm(sidewinder 6500esp). Someone said to wire the green and blue to the hoodpin. I under stand how this works but then wouldnt the car turn off if remote started as soon as I enter it(do to the saftey feature)?
How else can I wire it so it does not kill the engine when remote started?
Replies:
Posted By: auex
Date Posted: April 10, 2003 at 4:16 PM
Depending on what type of radar you picked up you would hook the trigger wires from the sensor to the blue(- trigger multiplexed) wire at the alarm's main harness. If it keeps going off then disconnect the warn away wire at the radar sensor.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: ksachet
Date Posted: April 10, 2003 at 4:48 PM
Blue is for hood/trunk pins green is for door triggers . Don't know too mutch else about the remote starting feachures. Don't really care too mutch for them myslef. https://www.directed.com/guides/manuals/ig/sidewinder/N553S.pdf
Posted By: x6369x
Date Posted: April 11, 2003 at 10:52 PM
Depends on what make/model the sensor is. If it's a DEI 508D, then you can make the connections at the shock sensor 4 pin harness. Connect the blue and green of the shock sensor to the blue facing the alarm. Connect the blue and green of the proximity sensor to the green facing the alarm.
These inputs are multiplexed like auex said. If the DEI sensor receives a warning trigger, it sends out a 0.5 second pulse to the alarm. If the DEI sensor receives a full trigger, it sends out a 1.0 second pulse to the alarm. The alarm reads the duration of the pulses and sends out the corresponding action.
-------------
Friends Don't Let Friends Bump Stock.
|