2007 ford sport trac canmax400dei
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120370
Printed Date: May 05, 2024 at 12:19 PM
Topic: 2007 ford sport trac canmax400dei
Posted By: bvrhunter
Subject: 2007 ford sport trac canmax400dei
Date Posted: February 26, 2010 at 8:16 AM
So I'm looking at installing something from the Python Responder LE line with the CANAMX400DEI...I haven't done an install in 4 or 5 years and having trouble wrapping my head around this. The only connections required are 2 wires (RX/TX) on the 20 pin CANAMX400DEI
https://www.xpresskit.com/DocumentDownload.aspx?documentid=5588&productid=82&firmwareid=-1
And then the 12+ constant, siren +, ground, parking light (all on H1 connector). And the H3 connector (all the ING/starter) connections applicable.
It just seems too easy.
Replies:
Posted By: kgerry
Date Posted: February 26, 2010 at 3:32 PM
you'll still need to hook up the plug with tach, hood pin, NSS, etc..... but yah, that's about it...
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: mikvot
Date Posted: February 26, 2010 at 7:17 PM
I hope you are getting the canmax dirt cheap....that would be the only way I could justify using that module on that vehicle. Basically, by using the canmax in D2D it will only save you from making 4 more connections compared to the module I would use.....idatalink ads-tb. 12,ign,ground,and gwr....3 of the connections, you will already be making for the remote start. I'm not saying the canmax won't work....but you might be able to save a little money by using something else.
|