pkall and toyota fj cruiser 2008 5901
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120389
Printed Date: May 05, 2024 at 4:15 PM
Topic: pkall and toyota fj cruiser 2008 5901
Posted By: rcavictor
Subject: pkall and toyota fj cruiser 2008 5901
Date Posted: February 27, 2010 at 2:17 AM
Hello friends ,
Led stay on when button is released . D2D is used .
I installed pkall as described in xpresskit guide .
Any idea ............
-------------
Thanks for answering, rcavictor.
Replies:
Posted By: rcavictor
Date Posted: February 27, 2010 at 3:27 PM
Hello ,
Found here :
... hook up the ground when running wire (GWR) AFTER you are done programming ...
Any idea ..........
-------------
Thanks for answering, rcavictor.
Posted By: bambam3030
Date Posted: February 27, 2010 at 5:17 PM
try wire to wire data to data sometimes has problems. I never use it.
-------------
BAM
Posted By: rcavictor
Date Posted: February 27, 2010 at 5:53 PM
Hello friends ,
Ground to black wire , and 12v. to blue . Is it full time , or switched by what ?
-------------
Thanks for answering, rcavictor.
Posted By: bambam3030
Date Posted: February 27, 2010 at 6:10 PM
12v constant to the blue
-------------
BAM
Posted By: rcavictor
Date Posted: February 27, 2010 at 7:17 PM
bambam3030 wrote:
12v constant to the blue
Hello friends ,
My question is :
Constant 12v. means vehicle is ready to start anytime , or easy to steal ..........?
Please explain ......... ------------- Thanks for answering, rcavictor.
Posted By: bambam3030
Date Posted: February 27, 2010 at 7:21 PM
12v constant to the blue wire on the pkall so that the moduel has power all the time so it will work and lock and ulock your doors make your door trigger work and remote start work.
-------------
BAM
Posted By: bambam3030
Date Posted: February 27, 2010 at 7:23 PM
this doesnt make your car easy to steal when you push the remote start wire it sends a signal to bypass your factory anti theft alowing for the car to start and locks etc.....
-------------
BAM
Posted By: rcavictor
Date Posted: February 27, 2010 at 7:44 PM
Hello friends ,
Thanks again for explanations . I agree that it is in the installation guide . I will try this tomorrow .
-------------
Thanks for answering, rcavictor.
|