Print Page | Close Window

2003 Wrangler Rubicon

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12042
Printed Date: August 27, 2025 at 3:27 AM


Topic: 2003 Wrangler Rubicon

Posted By: sniper_mjh
Subject: 2003 Wrangler Rubicon
Date Posted: April 10, 2003 at 4:04 PM

I need a wiring diagram for my jeep.  I bought a keypad ignition kill and I want to hook it up.  I was thinking that instead of having it disable the ignition, maybe it would be better to have it diable the fuel pump...  Most thieves dont look there.

also, I want to intall an alarm.  I want shock sensor, motion detector, and a pager..  Anyone recomend a good alarm, not to expensive and something I can install.  I dont need remote start or any crap like that




Replies:

Posted By: auex
Date Posted: April 10, 2003 at 4:19 PM
Ignition kill is basically killing the fuel pump. The 12V constant is red or pink/black, ignition is blue, and starter is yellow, all located in the ignition harness.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: sniper_mjh
Date Posted: April 10, 2003 at 4:42 PM
Ok,  that is helpful,  now here is my question...  Do i want to put my relay in the ignition wire of the starter wire???  The starter wire would still allow a thief to use a screwdrive and jump the solenoid, but putting the relay on the ignition would????  WHat does that ignition wire power up? 




Print Page | Close Window