remote start 2008 dodge ram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120434
Printed Date: May 16, 2025 at 5:17 AM

Topic: remote start 2008 dodge ram

Posted By: harleyrob
Subject: remote start 2008 dodge ram
Date Posted: March 01, 2010 at 3:07 PM

I put an Audiovox Pro 9776 in a 2008 Ddge Ram used a DEI CHALL module every thing works fine except initiate remote start the truck runs for 40 seconds and then shuts off,ANY IDEAS,PLEASE HELP!

Replies:

Posted By: tedmond
Date Posted: March 01, 2010 at 4:37 PM

make sure its bypassed properly by leaving a key in the ignition in the off position.

also make sure you program the tach for the audiovox unit.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: Velocity Motors
Date Posted: March 02, 2010 at 1:07 PM

Are you using W2W or D2d for the bypass ? Also, you didn't mention if the truck was a diesel or gas ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: harleyrob
Date Posted: March 02, 2010 at 1:36 PM

using d2d diesel got it working thanks all for the help

Posted By: bikewiz
Date Posted: October 10, 2010 at 11:51 PM

What wound up being your problem? I'm trying to find a solution to the CHALL not cranking my 2006 diesel with a python 991 connected w2w.

Print Page | Close Window