kenwood kpc 40 alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120436
Printed Date: May 15, 2024 at 12:48 PM

Topic: kenwood kpc 40 alarm

Posted By: fot3
Subject: kenwood kpc 40 alarm
Date Posted: March 01, 2010 at 5:34 PM

I ordered a new remote and and it came in but I can find any info on how to program for a new remote. The last time I got one the co. I took it to just punched some holes in the circuit board. There has got to be a way of programming the alarm to learn the new remote other than this procedure. Any help would be appreciated.
Thanks in advance.

Replies:

Posted By: unique316
Date Posted: March 01, 2010 at 10:28 PM

how old is this ?

I cannot even find even a discontinued model listing for this.

you may need to contact kenwood support and ask them.

-------------
YES....OR....NO..?
Unique
Wichita, KS

Posted By: Ween
Date Posted: March 01, 2010 at 10:35 PM

i believe the punching holes on the circuitboard is the way it's done..still have the punch in my toolbox. but of course don't remember how you determine the code. old code alarm remotes made you scratch traces on the circuit board...same idea.

Posted By: unique316
Date Posted: March 02, 2010 at 1:03 AM

wow...lol you always learn something new haha

that is a little before my time but good to know !

-------------
YES....OR....NO..?
Unique
Wichita, KS

Posted By: fot3
Date Posted: March 02, 2010 at 11:10 AM

Thanks for the input, any idea where I can find a punch that would work.
I watched the service tech punch it some years ago and all he did was line up the boards and punched it out.
fot

Posted By: Ween
Date Posted: March 03, 2010 at 10:05 AM

i'll send you the one i still have..pm me back if interested

Posted By: fot3
Date Posted: March 03, 2010 at 10:28 AM

Thanks for the help. I was going to check with some places around town like radio shack and others to see if anyone has one and if not I'll get back with you about borrowing the punch.
Thanks again for your help.

Print Page | Close Window