Print Page | Close Window

clifford 50.7x 02 subaru wrx turbotimer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120440
Printed Date: May 14, 2025 at 9:17 PM


Topic: clifford 50.7x 02 subaru wrx turbotimer

Posted By: IMPORTDUDE
Subject: clifford 50.7x 02 subaru wrx turbotimer
Date Posted: March 01, 2010 at 8:37 PM

Turbotimer setting is @ 1min.

IT will not stop at 1min tho. 
Everything esle works as spose to

2002 subaru wrx

clifford 50.7x

thanks in advance

TONY

Main harness

H1/2 red 12VDC constant input---> battery +12V
H1/3 brown siren output---->siren (+), siren (-) to ground
H1/5 black chassis ground---->ground
H1/7 blue trunk pin/instant trigger input--->yellow/red(keyless module)
H1/8 green (-)door trigger input--->door trigger wire >yellow (intergreted unit)

H1/9 BLACK/ white (-)Dome light----->yellow (intergreted unit)
H1/10 WHITE/ blue remote/start/turbo timer activate input--->E-brake combined with NSS from clifford
H1/11 white parking light output--->parking light wire> orange

H1/12 orange ground when armed---> orange wire from 530T

Door lock 3-pin connector

1 blue (-)500mA unlock output--->(-)door unlock > yellow/red (keyless module)
2 empty
3 green (-)500mA lock output--->(-)door lock > RED / white(keyless module)

Aux harness

H2/2 WHITE/ violet Aux 1 - White wire from 530T

Remote Start input harness

H2/1BLACK/ white (-)neutral safety input--->e-brake wire > EBRAKE PINK Combined with WHITE/ blue remotestart/turbotimer activation wire
H2/2violet/white tachometer input--->Yellow pin 24 @ ecu
H2/3 brown (+)brake shutdown input--->break pedal wire > WHITE/ black @ pedal switch
H2/4 gray (-)hood pin input-->hood pin
H2/5 blue/white (-)rear defrogger -->red @ intergreted unit

Remote Start Aux output

Blue- (-)200ma Status output ----> clutch switch wire GREEN/ YELLOW

remote start connector

H3/1 pink (+)ignition input/output--->ignition wire > Black
H3/2 RED / white (87)flex relay input--->+12V > BLACK/ white
H3/3 orange (+)accessory output--->accessory wire > BLACK/ blue
H3/4 violet (+)starter output--->starter wire car side >BLACK / YELLOW
H3/5 green (+)start output--->start wire key side >BLACK / YELLOW
H3/6 red ignition 1 input--->12V >BLACK/ white
H3/9 RED / black accessory/starter relay input--->12V > BLACK/ white




Replies:

Posted By: t&t tech
Date Posted: March 02, 2010 at 5:13 AM
What duration do you have the timer programmed to? Also disconnect that WHITE/ blue wire from the H1 harness that is connected to the nss and the ebrake! It's only an external trigger source for the R/S portion!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5



Posted By: IMPORTDUDE
Date Posted: March 02, 2010 at 1:47 PM

depin'd

also turbotimer works

i was pressing the wrong buttons

what i thought was turbo timer was remotestart and it kept the car on

for the 50.7 its function function remotestart to turbo timer mode


Print Page | Close Window