1999 suburban won’t start viper 5900

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120478
Printed Date: September 08, 2025 at 9:47 AM

Topic: 1999 suburban won’t start viper 5900

Posted By: b0dypart69
Subject: 1999 suburban won’t start viper 5900
Date Posted: March 03, 2010 at 12:19 PM

My '99 Suburban will not start.

When it start either by remote or by key it starts for about a sec. and dies.

Does this have something to do with the Bypass module?

Thanks

Replies:

Posted By: b0dypart69
Date Posted: March 03, 2010 at 2:05 PM

I suspect it was understood but, some people might be confused...

If i use the key or if i use the remote it doesn't matter same result...

Posted By: matthewjon
Date Posted: March 03, 2010 at 3:02 PM

did you have to cut the starter wire? if so, are you sure that the key side/starter side arent mixed up?

my noob guess.

Posted By: matthewjon
Date Posted: March 03, 2010 at 3:06 PM

matthewjon wrote:

disregard last post

it actually starts, but just for a second.

Posted By: b0dypart69
Date Posted: March 04, 2010 at 8:39 AM

well i removed the alarm "brain" and reinstalled it and the truck started fine, not sure maybe a loose wire or for some reason the alarm needed reset... I have had it installed for over 2 years and this is the first time having anyproblem...

Print Page | Close Window