antigrind w/o starter kill

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120482
Printed Date: September 09, 2025 at 2:03 PM

Topic: antigrind w/o starter kill

Posted By: kaplah
Subject: antigrind w/o starter kill
Date Posted: March 03, 2010 at 1:59 PM

I've got a 2002 Chevy Malibu that I'm installing a Bulldog model 500 remote car starter in. I do know that the 02 malibu has no built in anti grind, and the family member who will be driving it will probably grind the ignition a few dozen times getting into her running car. Is there a simple circuit I can wire that will act as anti grind without acting as a starter kill? The basic use case is you get in your car nothing should stop you from starting it.

I was considering other brands of car starters that had anti grind, but they doubled as starter kills. As such I couldn't use them. As such I just went with the product that is made in the USA.

-------------
Instant Human
Just add Coffee

Replies:

Posted By: KPierson
Date Posted: March 03, 2010 at 2:44 PM

Use the status output of the remote start to break the starter wire. Just make sure you hook the starter output up downstream from the relay!

-------------
Kevin Pierson

Posted By: t&t tech
Date Posted: March 04, 2010 at 9:03 AM

Wired like this

Cut starter wire after starter kill relay and

Pin 87a - key side

pin 30 - engine side

pin 85 - GWR from starter or aka status output!

pin 86 - ignition

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5