2003 pontiac boneville wire location

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120517
Printed Date: May 09, 2025 at 4:15 PM

Topic: 2003 pontiac boneville wire location

Posted By: timputt
Subject: 2003 pontiac boneville wire location
Date Posted: March 05, 2010 at 6:26 AM

I am installing a EZ STARTER remote start in a 2003 pontiac bonneville and there is one wire i am not sure about locating or if it is even needed.... I am trying to locate the oil sensor wire because ther is an input for this on the remote start...... I am thinking if i don't hook it up the remote starter will not work.....Any help would be greatful.......I personally would not use this brand of remote start but it is n ot my car

https://209.240.24.217/pdf/EZ-65%20Manual.pdf

Replies:

Posted By: tedmond
Date Posted: March 05, 2010 at 6:30 AM

well no matter where you connect this wire, it will overcrank.

connect it to the ignition wire.

this is a china made unit, and you might run into nothing but problems.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: timputt
Date Posted: March 05, 2010 at 6:35 AM

I tried to tell my friend not to buy this junk but he wants the factory look of the key fobs

Posted By: icarus_icarus
Date Posted: March 05, 2010 at 7:56 PM

That doesn't look like any 'factory look' of any remote I've even seen come from a car manufacturer... posted_image

-------------
·Ï¢årµ§·
posted_image

Posted By: tedmond
Date Posted: March 06, 2010 at 7:00 AM

well connect that to igniton and let us know how it works.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window