first compustar /advise

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120534
Printed Date: May 14, 2025 at 2:08 PM

Topic: first compustar /advise

Posted By: will757
Subject: first compustar /advise
Date Posted: March 05, 2010 at 6:52 PM

ok so my distributor ran out of the avital stand alone remote starts so i picked up a compustarft-6200s-cont with the one button remotes. ok first off i have never done one of these before and its nothing like any DEI ive ever done in my life. how the hell do i program the options? i see how to program the remotes but thats it. please help i have to install this tomorrow for my buddys wife for her birthday

Replies:

Posted By: tedmond
Date Posted: March 05, 2010 at 7:49 PM

most settings can be done from the remote but only if you have the 1way remote with 4 buttons.

if you have the 1 button only you are screwed. You will need an OP500

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: kreg357
Date Posted: March 05, 2010 at 8:06 PM

There is one other way to program the FT-6200-s. If you are using an iDatalink Blade module that plugs into the FT-6200-s and have the iDatalink USB interface programming cable, you can set the Compustar options when you flash the Blade module.

When you go to the iDatalink Web site to flash the correct firmware on the Blade module, you will be able to update the Compustar FT-6200-s with its latest firmware and set its programming options on line, at your PC, from menus on the same web page Pretty nice routine!

-------------
Soldering is fun!