how to add a 2way pager to factory remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120586
Printed Date: July 07, 2025 at 8:44 AM

Topic: how to add a 2way pager to factory remote

Posted By: CBR629
Subject: how to add a 2way pager to factory remote
Date Posted: March 08, 2010 at 11:20 AM

Hello all I have a 2008 Pontiac G8 GT and I'm looking for a way to add a 2 way pager to my factory system,I had found this ULTIHUB-KIT2-GM6X from Crutch field and called them and they said it will not work for my car.Any suggestions?

-------------
THANKS

Replies:

Posted By: tedmond
Date Posted: March 08, 2010 at 2:25 PM

you can always add a 2way system to function in conjunction with the factory alarm, but not remotes. factory remotes are 1 way and do not communicate back and forth.

the system is basically what you would get if oyu purchased a remote start with a proper databus bypass.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: CBR629
Date Posted: March 09, 2010 at 9:40 AM

Ok do you know what alarm I could use to add this two way remote with sir?

-------------
THANKS

Posted By: tedmond
Date Posted: March 09, 2010 at 4:57 PM

you can check out 2way alrms/rs from copustar, dei, audiovox or anything name branded. you will be fine. 2way units cost anywhere from 350-600 installed

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window