reprogramming for magicar fai 300

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120727
Printed Date: June 01, 2024 at 1:28 PM

Topic: reprogramming for magicar fai 300

Posted By: mjballer2
Subject: reprogramming for magicar fai 300
Date Posted: March 14, 2010 at 11:40 PM

Hi, does anyone have the instructions to reprogram the remote for a magicar fai-300 ?

Replies:

Posted By: tedmond
Date Posted: March 15, 2010 at 7:19 AM

1) cycle igniton off to on 5 times and leave on.
2) you will hear a click
3) press lock on remote, it will click again.
4) turn off igniton and its programmed.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: mjballer2
Date Posted: April 10, 2010 at 7:35 PM

thanks for the reply.

that didn't seem to work though. i have a copy of the manual but i can't seem to figure out how. If it helps, i uploaded it .

https://www.yousendit.com/download/bFFQbUpXcWZubHp2Wmc9PQ

Posted By: tedmond
Date Posted: April 10, 2010 at 9:15 PM

1) open driver door
2) flick it from acc to ign 3 times and after the third time, leave it
3) parking lights flash or you will hear a click from the unit
4) press lock on the remotes one after another. wait 2 seconds then remove the key.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: mjballer2
Date Posted: April 19, 2010 at 4:34 PM

what does acc to ign mean ? if it means to turn the ignition on and off then it didn't work posted_image

i can't seem to get this to be reprogrammed again. maybe my only option is to buy a new alarm.

Print Page | Close Window