06 trailblazer remote starter
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120778
Printed Date: April 28, 2024 at 5:41 AM
Topic: 06 trailblazer remote starter
Posted By: lynnboy021
Subject: 06 trailblazer remote starter
Date Posted: March 17, 2010 at 3:59 PM
i just installed a remote starter to my truck and it works and all but i have a light with a pad lock around a car.. is there something i am missing?
Replies:
Posted By: chev104275
Date Posted: March 17, 2010 at 5:28 PM
what system and bypass are you using ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: lynnboy021
Date Posted: March 17, 2010 at 7:13 PM
i forgot wich one i installed but i am useing a 791 bypass from bulldog (that i bought at autozone) but i did not hook up the doors (did not wanna buy the other bypass) only the remote start.
Posted By: chev104275
Date Posted: March 17, 2010 at 7:49 PM
isnt the 791 a key in the box style bypass ?? that wont work with your truck you need either an xk01 or GMDLBP i have used the DEI 1701G in the past with no issues
-------------
If i Can't Install it I Don't need it Joe
Posted By: tedmond
Date Posted: March 17, 2010 at 8:05 PM
its a passlock based antitheft. the bulldog 791 will work. just make sure you program and connected the wires properly.
------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: chev104275
Date Posted: March 17, 2010 at 8:19 PM
tedmond is right i should have looked up the part first
-------------
If i Can't Install it I Don't need it Joe
Posted By: blanx218
Date Posted: March 17, 2010 at 10:52 PM
Im not familiar with the Bulldog bypasses, but my question would be does it require you to cut the yellow passlock wire or just tap on to it? When DEI replaced the 555L/556L(cut passlock wire) with the PLJX(dont cut passlock wire) I started having issues with basic passlock 2 vehicles. Now its a GMDLBP or and idatalink ads-dl. they would both cost you a few extra bucks but are basically bulletproof bypasses and you would also get keyless entry with factory arm/disarm.
Posted By: kreg357
Date Posted: March 18, 2010 at 3:51 AM
Here is the install guide for the Bulldog 791 bypass: https://www.bulldogsecurity.com/pdf/Model791.pdf Install on a PassLock II does require cutting the yellow wire. I have never used them on a PassLock II vehicle, so I can't comment on their reliability but I agree with Blanx218. The iDatalink ADS DL is my preferred solution for PassLock II. ------------- Soldering is fun!
Posted By: tedmond
Date Posted: March 18, 2010 at 6:18 AM
it does need to be cut, just make sure you solder the passlock wires. maybe its just by luck but when i connect them and try to start, it wont work until i solder them. just my stroke of luck i guess. ------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: lynnboy021
Date Posted: March 18, 2010 at 10:01 AM
you know the funny thing is when i bought the 791 bypass it does not tell me to cut it and on the website it tells me to lol i hate remote starters thanks guys
|