Print Page | Close Window

05 dodge magnum, viper 350

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120816
Printed Date: April 29, 2024 at 4:10 PM


Topic: 05 dodge magnum, viper 350

Posted By: sriguez
Subject: 05 dodge magnum, viper 350
Date Posted: March 19, 2010 at 7:48 PM

Hello im installing a viper 350 plus into a  05 dodge magnum and im trying to find the door trigger wires and also the door lock is a one wire system do i need resistor or relays for this application  sriguez@cavtel.net

-------------
Riguez



Replies:

Posted By: tedmond
Date Posted: March 19, 2010 at 8:26 PM

you need 2 relays and 2 resistors

PURPLE / dark green
lock - 100ohm
unlock - 330ohm

LF Latch PURPLE (-) DRIVERS KICK OR INSTRUMENT CLUSTER posted_image
posted_image RF Latch PURPLE / WHITE (-) DRIVERS KICK OR INSTRUMENT CLUSTER posted_image
posted_image LR Latch PURPLE / GRAY (-) DRIVERS KICK OR INSTRUMENT CLUSTER posted_image
posted_image RR Latch PURPLE / YELLOW (-) DRIVERS KICK OR INSTRUMENT CLUSTER posted_image
posted_image Trunk Trigger PURPLE / ORANGE (-) PASSENGER KICK OR INSTRUMENT CLUSTER



-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: sriguez
Date Posted: March 19, 2010 at 8:40 PM
Thank,You for replying so fast

-------------
Riguez




Posted By: jeremytravis
Date Posted: March 19, 2010 at 10:21 PM

Isn't it ,

PURPLE / dk.green

Lock_ -330ohm

Unlock_-100ohm

& don't forget to diode isolate all four door trigger wires.



-------------
**ADVANCED MECP CERTIFIED




Posted By: another-kelly
Date Posted: March 20, 2010 at 12:12 AM
jeremytravis wrote:

Isn't it ,

PURPLE / dk.green

Lock_ -330ohm

Unlock_-100ohm

& don't forget to diode isolate all four door trigger wires.





yes:

POWER LOCK       PURPLE / DARK GREEN (1-Wire Door Lock System) See NOTE *3       IN DRIVERS KICK PANEL

POWER UNLOCK       Same wire

NOTE *3 this vehicle uses a 1-Wire Door Locking System, LOCK requires a (-)Negative thru a 330 Ohm Resistor and UNLOCK requires a (-)Negative thru a 100 Ohm Resistor




Posted By: sriguez
Date Posted: March 21, 2010 at 5:17 PM
 does anyone have the diagram for the door lock relays and is it a regular 30 amp 5 pin relay

-------------
Riguez




Posted By: tedmond
Date Posted: March 21, 2010 at 7:47 PM
a 30/40 amp spdt will be fine.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: sriguez
Date Posted: April 10, 2010 at 4:15 PM
Hello
    does anyone have the door lock wiring and info for a 98 Chrysler cirrus its a one wire setup

-------------
Riguez




Posted By: blanx218
Date Posted: April 11, 2010 at 11:43 PM

98 Cirrus locks:

WHITE/ green (+) single wire...lock thru 620 ohm....unlock thru 2.7K ohm





Posted By: sriguez
Date Posted: April 14, 2010 at 7:24 PM
hello i have it hooked up with two relays and the two resistors
and it is not working and it is wired to the WHITE/ green wire coming from the 20 pin connector behind the fuse panel is this correct? also which wire is the trunk trigger Thanx for any assistance.

-------------
Riguez




Posted By: kreg357
Date Posted: April 14, 2010 at 8:29 PM

Did you wire up the relays as per the top diagram in this guide?  https://www.bulldogsecurity.com/diagrams/extrainfo/diagrams/14301_CIRRUS_CHRYSLER%20COUPE%20and%20SEDAN%201%20WIRE%20JBS%20UNITS.pdf

You will need to test the WHITE/ Green Door Lock wire with a DMM to be sure you have the correct wire. 

Are you looking for the trunk trigger or the trunk release?  The Trunk Release is BLACK/ White (+) in the Drivers Kick Panel.

You can get wiring info from the Bulldog Security Web Site at:  https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp

Additionally you should probably start a new thread for the 98 Cirrus....      This one was started for the 05 Magnum.



-------------
Soldering is fun!





Print Page | Close Window