2008 sequoia wiring info

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120823
Printed Date: July 04, 2025 at 5:40 PM

Topic: 2008 sequoia wiring info

Posted By: drail24
Subject: 2008 sequoia wiring info
Date Posted: March 20, 2010 at 8:12 AM

Preparing to install an Avital 5301 remote start on a 2008 Toyota Sequoia. Would anyone happen to have the wiring info for the remote hatch? Also, can anyone tell me or provide info if there is a factory hoodswitch that can be used? I've searched the forums and found some wiring diagrams for most of the other items needed, but have yet to find anything on these two pieces.

Thanks in advance for any help.

Replies:

Posted By: tedmond
Date Posted: March 20, 2010 at 10:11 AM

factory hood pin - Purple (-) Pin 16 in 24pin white plug @ body ecu

Trunk release - Orange (5wire) Pin 1 in 24pin white plug @ body ecu

Body ecu is attached to the dash fusebox

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window