Print Page | Close Window

2007 f150, viper 5901

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120845
Printed Date: May 21, 2024 at 7:55 AM


Topic: 2007 f150, viper 5901

Posted By: mcman
Subject: 2007 f150, viper 5901
Date Posted: March 21, 2010 at 12:50 PM

(1) Could you tell me how would I do the wiring to turn on the factory wired heated mirrors on with the viper 5901?

I know that the wire harness for the viper 5901 has a H2/16 (-) 200ma 2nd status/rear defogger output.

Do I need connect the H2/16 wire to the back of the factory switch for the heated mirrors (pin 10 circuit 1010 (DB-OG)) or do I need to wire in another relay?

(2) I would like also to know how you do the second unlock on the viper 5901 or how it works. My son wants it to unlock the drivers door the first press unlock and unlock the rest of the door on the second unlock like the factory.

(3) How would you wire more than one sensor in? The Viper 5901 cpu1 has only one Optional Mux Port (for additional sensors). What I want to do is connect a Dei 508d and a 507m to the alarm. I was told to cut the plug off one of the sensors and wire the together as one. Does just doesn’t sound right to me but it maybe my only way.

Any help on the on these problems would be very much appreciated.




Replies:

Posted By: chev104275
Date Posted: March 21, 2010 at 1:58 PM
Looks like you should be able to use the DB/OG with the H2/16. Program the starter for rear defrost. That DB/OG also controls the rear defrost


-------------
If i Can't Install it    I Don't need it   Joe


Print Page | Close Window