fortin bypass, viper 5701, 06 tacoma

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120879
Printed Date: May 13, 2024 at 12:19 PM

Topic: fortin bypass, viper 5701, 06 tacoma

Posted By: davidletran
Subject: fortin bypass, viper 5701, 06 tacoma
Date Posted: March 22, 2010 at 4:50 PM

I have a 2006 Toyota Tacoma double cab v6 thanks

I have a viper 5701 and trying to install the alarm myself. I installed alarms on a few cars but never with a keysense.

I tapped into the lock (purple) and unlock (GREEN/ black) wires from the kick panel but when i arm or disarm the locks dont engage.

I also have a Fortin KEY-OVERRIDE-SL2 box but the instructions that came with it is garbage. where is the data in and data out wires?

Does my truck have a data link box? and if so, the fortin override came with a plug that suppose to plug into the datalink box?

Here is the link to the fortin installation instructions.
https://ifar.ca/download/1846/key-override-sl2_installation_guide.rev-z.pdf

thanks guys , God bless

Replies:

Posted By: tedmond
Date Posted: March 22, 2010 at 6:27 PM

the fortin pieces is prob one of the easiest pieces to install and program.

look at your ignition cylinder for a 7pin plug.

Pin 4 - rx
Pin 5 - tx

for the keysense wire, there is a 2 pin white plug that is at the ignition switch as well. The keysense is the wire next to the WHITE/ black

Locks - purple (-) @ dkp Pin 4 of 10pin plug
Unlock - GREEN/ black (-) @ dkp Pin 8 of 10pin plug
test the wires by turning the key in the driver door.

test the outputs of the unit to see if they work.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window